UPVC Door Lock Replacement
UPVC doors are a great security measure against burglaries. However, they do have a few limitations, but these can be overcome by installing a deadlock.
If your uPVC front door lock feels loose or floppy, it may be time to change the barrel lock. This simple DIY project can increase the security of your home and improve its appearance.
Remove the old lock cylinder
If you're experiencing that your front door feels weak when you lock it or your key struggles to turn, you could have a damaged lock cylinder. It will improve security and ensure smooth operation by replacing it. The procedure is fairly easy and will take around 30 minutes. The only tool you'll need is a screwdriver. To start, open your door and take a look at the edge of the lock the cylinder. There is an elongated screw parallel to the bottom part of the cylinder. Remove it with the screwdriver and put it away in a safe location.
You'll need to know the exact dimensions of the cylinder that you currently have to determine the right replacement. The sizes typically range between 60mm and 110mm. To determine the size of the lock, you will have to remove the screw from the faceplate. You can also turn the lock handle while the cylinder is in place to determine the amount it moves.
The next step is to determine the cylinder's diameter and cylinder cam length. These measurements will ensure that the new lock fits the door you have. The dimensions of the lock can differ based on the type of uPVC. You'll need to pick the replacement cylinder which is similar in size or slightly bigger than the one that is currently in use.
Once you've got the measurements then it's time to take the old cylinder from the door. It's an easy task but you need to perform it properly to avoid damaging your frame or door. Make sure that the door is secured or propped up so it does not close between steps.
If you don't want to tackle it yourself, hiring a professional locksmith is a good option. They can offer expert advice, flawless execution and peace of mind. They can also assist you in choosing a secure and secure lock system. DIY can be a good option to save money as well as gain new skills. All you require is patience and the right tools, such as a Phillips screwdriver. The process of changing your uPVC lock isn't as daunting as it appears.
Installing the new lock cylinder
It is crucial to follow the correct steps and follow the correct measurements when replacing a lock on your front door. This will not only allow you to avoid future problems but it will also keep your home secure and allow you to use a key to both sides of the door. You should measure the uPVC lock's overall length as well as the backset and cylinder size before replacing it. These dimensions will ensure that the new lock cylinder is able to fit into the uPVC frame and functions correctly without gaps or weaknesses in security.
The first step is to remove the handle from the door by loosening it with an screwdriver. Next, you need to locate the screw that holds the cylinder lock in place and then remove it. You can then remove the lock you have previously used by inserting the key into the cylinder and turning it both left and right. It is possible to remove the cylinder with the key if it is in one of these positions.
Installing the new cylinder on the front door is simple. You can follow the same steps you used to remove the old one. However, you must be aware that the new cylinder won't fit in the area where the previous one was. The cylinder must be aligned properly in order to be locked and closed using keys. Make patio door lock replacement that the cylinder is centered and has an elongated keyway.
It's not too difficult to install a new uPVC door lock, but you should be careful not harm the door's frames or handles. If you aren't sure about your abilities to complete this task, consider hiring a professional who is certified by Checkatrade and has experience with the various types of doors. A locksmith will save you time and money by completing the task quickly and efficiently.
Reattaching the door handle
There are several reasons you might want to upgrade the lock on your front door. You might have lost a key to your lock and the previous tenant hasn't returned keys, or you want to upgrade to an extra secure lock. It takes only five minutes to replace the barrel on a lock of the uPVC front door. You'll need a Phillips head screwdriver, a new lock cylinder and an extra key for the cylinder (if you're using one). Ensure that the door is propped open or secured securely to ensure that it doesn't shut during the process.
It's not as difficult as you imagine to replace the lock mechanism on the uPVC door. Begin by identifying the type of lock is installed on your front door, then determine the size that you need to replace it. For older doors, there are strip locks as well as multipoint lock options. It is easier to replace your uPVC door lock if you are aware of the brand and type it is.
After replacing the cylinder, you will need to connect the handle. First, you'll need to loosen the set screw on the handle's spindle shaft with a screwdriver or Allen key. This will let you remove the handle and expose the spindle shaft. If the shaft is threaded you'll need to loosen it a bit and back it up with a screwdriver to ensure a proper fit.
Test the lock after you have tightened the screws and the lock cylinder. Check that the key turns easily and fits properly, and the locking mechanism of the handle is working well. Locksmiths can assist you if you're not comfortable doing it yourself.
Be aware that uPVC lock mechanisms and door handles require regular lubrication to function properly. This is particularly true in areas that experience excessive wear and tear such as those that are frequently used or closed and locked. By adding a small amount of lubricant can go a long way towards increasing their lifespan and making sure they function correctly.
Test the new lock
A upvc lock is an important part of the security of your home. Like any other device the uPVC lock may get damaged or worn out in time. The key to a well-functioning uPVC lock is regular maintenance. This will prevent malfunctions from occurring and compromising the security of your home. The best method to achieve this is to lubricate the internal mechanisms using an approved oil every six months. This will stop the lock from rusting and damaging the.
You can use a silicon spray in addition to regular lubricant to loosen up the keyway. This will make it easier to insert the keys. This is a straightforward DIY solution that could save you money in the long term. Avoid using WD-40 because it could leave a oily residue that can damage the lock.
Once you have installed the new cylinder, it is important to test it out before assuming it works correctly. This can be done by testing the handle from both the inside and outside of the door. It is now time to put the handles back into place and then re-insert the spindle screws if everything is in order. Replace all screws that secured the handles. Give yourself a pat on your back for a good job!
If you are seeking to increase the security of your home, a locksmith can install additional features, such as door chains or sash locks. They can help you select the most appropriate locks for your home. A professional can also help you determine the best lock cylinder size for your doors. This is crucial because a wrong lock can compromise security.
The cost of replacing a uPVC door lock may vary according to the type of lock you choose and the number of doors in need of replacement. The average cost of a professional locksmith will vary from PS75 to PS100 per hour, however this cost can vary depending on the location you live in and the type of lock you need. Compare locksmith costs before settling on the right firm.